|
UTEK TECHNOLOGY CO.,LTD
|
rs232 to rs485 conversion rs232 to rs485 connection rs232 to rs485 convertor
| Place of Origin: | Zhejiang, China (Mainland) |
|
|
| Add to My Favorites | |
| HiSupplier Escrow |
Product Detail
RS232 To RS485 Converter Isolat
RS232 To RS485 Converter Isolated Interface Asynchronous Half-duplex
RS-485 half-duplex connection
Isolation voltage: continuous 2.5KVrms /500VDC isolation
Communication distance: 0-5 KM(115200bps-9600bps)
Description:
UT-502 is an RS-232C and RS-485 compatible industrial photoelectric isolated interface converter designed to convert a single-end RS-232 signal to a double balanced differential 2 port/RS signal. The built-in photoelectric isolator can provide isolating voltage up to 2500Vrms and it has a high-speed transient voltage supress or which is designed to protect the 2 port/RS-485 interface. The advanced TVS (TRANSIENT VOLTAGE SUPPRESSOR) presents a high-impedance state under normal conditions, and it can fast reduce the resistance across two ends while it's withstanding transient high-power impulse so as to absorb the high current and clamp the voltage across it to a preset value, thus prventing the components in the next stage from being damaged. This suppressor can supress lightning and ESD (electro-static discharge) with lightning surge protection power of 600W for each line as well as surge voltage and transient over-voltage on the lines cuased for any reason. Very small inter electrode capacitance can ensure high speed data transmission of RS-485 interface. RS-232 side is connected to RS-232C compatible interface through a DB9 female connector, and RS-485 side is connected to a 10-bit wiring terminal. The converter equips with automatic data transceiver without delay, and the unique I/O circuit can automatically control the direction of data flow without any handshake signal (such as RTS/DTR). Both 2-port photoelectric isolated half-duplex (RS-485) mode switch without jumper setup and plug&play can be achieved. This converter can support any existing communication software and interface hardware, eliminating the need to change the software for previous RS-232 based operation mode.
UT-502 industrial photoelectric isolated interface converter can provide reliable connection for point-to-point or point-to-multipoint communication.Maximum 128 RS-485 interface devices can be supported for the point-to-multipoint communication. Data rate can be up to 300-115.2KBPS, and the power indicators and data traffic indicators can be used for error indication. RS-232 to 2-port/RS-485 conversion is supported.
Specifications:
Performance parameters
1. Interface: Compatible with RS-232 and RS-485 standards of EIA/TIA
2. Electric connection: DB9 female connector (RS-232 side) to 10-bit wiring terminal (RS-485 side)
3. Protection class: +/-15KV ESD protection for RS-232 interface; Dedicated DC/DC module, 600W lightning strike and surge protection for each RS-485 line.
4. Isolation voltage: continuous 2.5KVrms /500VDC isolation
5. Operation mode: Asynchronous half-duplex
6. Signal indication: 5 signal indicators- one for power (PWR), two for transmission (TXD) and two for reception (RXD)
7. Transmission media: twisted-pair cable or shielded cable
8. Communication rate: 115.2Kbps for distance of 300m38.4Kbps for distance of 2.4Km9600bps for distance of 5Km
9. Dimension: 117mmX80mmX25mm
10. Working environment: -40 to 85,relative humidity of 5% to 95%
11. Communication distance: 0-5 KM(115200bps-9600bps)
Connector and signal
RS-232C bay-line distribution
|
DB9 Female(PIN) |
RS-232C Interface signal |
|
1 |
Earth protection |
|
2 |
Receive data SIN(RXD) |
|
3 |
Send data SOUT (TXD) |
|
4 |
Data terminal ready DTR |
|
5 |
Ground signal GND |
|
6 |
Data setting ready DSR |
|
7 |
Request send RTS |
|
8 |
Clear send CTS |
RS-485/RS-422 output signal and connector end bay-line distribution
|
Wiring terminal (PIN) |
Output signal |
RS-485 half-duplex connection |
|
1 |
T/R+ |
RS-485 (A+) |
|
2 |
T/R- |
RS-485 (B-) |
|
3 |
UTEK TECHNOLOGY CO.,LTD [China (Mainland)]
Business Type:Manufacturer |
